Design with geometric faces
13 June 2020 21:07
// Manicure
To perform this design, we will need:
We apply a thin layer of MollonPRO top to the color coating and polymerize it in a lamp for 10 seconds.
The slider, separated from the substrate, is placed on a sticky layer of the top, leveled on the surface, well pressed to the material, sent to the lamp for another 20 seconds.
From above, we apply two more layers of the top. Dry and remove the sticky layer.
Here is such a bright stylish design we have turned out.
- Base and top for gel Polish;
- Colored gel Polish;
- Slider design;
- Scissors;
- Silicone brush;
- Lamp for gel Polish polymerization;
- Liquid for removing the sticky layer;
- A cotton pad soaked in water.
First, we apply the base and color coating. Today we chose a bright red gel Polish from Cristina (number 1412).
And for the design, take the slider from BPW. Style (number 5-1886).
We apply a thin layer of MollonPRO top to the color coating and polymerize it in a lamp for 10 seconds.
The slider, separated from the substrate, is placed on a sticky layer of the top, leveled on the surface, well pressed to the material, sent to the lamp for another 20 seconds.
From above, we apply two more layers of the top. Dry and remove the sticky layer.
Here is such a bright stylish design we have turned out.
- Комментарии
Loading comments...
