Design with leaves and geometry
1 June 2020 21:07
// Manicure
If you have been reading our blog for a long time, you are probably familiar with the list of materials needed to complete the design. Namely:
On the color coating, apply a thin layer of top and dry in a lamp for 10 seconds.
The slider, separated from the substrate, is placed on a sticky layer of the top, leveled on the surface with a silicone brush and pressed well to the material. Dry in the lamp for another 20 seconds.
Top cover with two layers of top, dry and remove the sticky layer.
Here is a design with bright geometric shapes and leaves we have turned out.
- Base and top for gel Polish;
- Color gel Polish;
- Slider design;
- Scissors;
- Tweezers;
- Silicone brush;
- Lamp for gel Polish polymerization;
- Liquid for removing the sticky layer.
On the color coating, apply a thin layer of top and dry in a lamp for 10 seconds.
The slider, separated from the substrate, is placed on a sticky layer of the top, leveled on the surface with a silicone brush and pressed well to the material. Dry in the lamp for another 20 seconds.
Top cover with two layers of top, dry and remove the sticky layer.
Here is a design with bright geometric shapes and leaves we have turned out.
- Комментарии
Loading comments...
