Nail design with Teddy Bears

Manicure with Teddy bears is ideal for the youngest fans of the unusual design of nails, because many are attached to these soft plush toys from early childhood. Today we will show you an example of doing a manicure with sliders with Teddy Bears, tk. not every master can perform this design by hand.

For work we will need:

• Base and top for gel-varnish;
• Colored gel-varnish;
• Slider design;
• Scissors;
• Tweezers;
• Silicone brush;
• Lamp for polymerization of gel-varnish;
• Liquid for removing the sticky layer.

Today we decided to make a design in our favorite pink-blue range. And to create a snowy atmosphere, a colored gel-lacquer we covered with a shimmer.

For design, we took a slider design, suitable for working with a database of any color, from BPW (номер 1-1270).

When working with this slider design, it is worth bearing in mind that the layer of paint here is slightly thicker than the usual sliders on a white background. But this does not affect the elasticity of the film or durability. Usually, sliders on the entire nail plate, we recommend to put on a wet base, if this is a small pattern, it will be easier to cover the top, which is suitable for fixing the slider design. With this design, we did exactly that.

On the color coating, apply a thin layer of viscous top and dry it for 5 seconds in the lamp, so that the top grasped slightly.

In parallel with water, we remove the slider from the substrate.

On the sticky layer of the top put the selected design element and with a silicone brush smooth it on the surface so that the air bubbles leave the film, and the edges snug against the coating. After that, dry the top with the slider a minute.

After that, we cover the same top design, well sealing the slider under the material. If you are not sure, you can apply two layers of top.

That's such a nice, winter manicure with bears we got.

Присоединяйтесь к нам в соцсетях Инстаграм и ВКонтакте и первыми узнавайте о наших новинках и акциях!