/home/bitrix/ext_www/bpw.style/bitrix/templates/aspro_next/page_blocks/header_fixed_custom.php

Comparison0 Deferred 0 Basket0 0

/home/bitrix/ext_www/bpw.style/bitrix/templates/aspro_next/page_blocks/header_mobile_menu_custom.php

Nail design with New Year's Teddy

--Nail design with New Year's Teddy

18 November 2018 0:00

// Manicure

And let's slightly dilute the marathon of autumn designs with the plot with Christmas bears?

To perform the design we need:

Base and top for gel polish;
Color gel polish;
Slider;
Water;
Tweezers;
Scissors;
Paper napkin;
Silicone brush;
Gel polish lamp;
Liquid to remove the sticky layer.

To begin with, we apply the base and color base for the design. We chose red and white gel polishes, which are so often used to create New Years mood.

1-1272-1.jpg?1542517671604

For the design we take a slider from BPW, suitable for working with the base of any color (number 1-1272).

1-1272-2.jpg?1542517694412

Cut out the necessary fragments. We apply a top from MollonPRO on the color coating, which, due to its viscosity and density, is excellent for fixing the slider design. Dry in the lamp for 5 seconds.

On the adhesive layer of the top, put the design separated from the substrate. On the adhesive layer, it slides well, which allows you to lay it as we would like. We smooth it with a silicone brush film, remove air bubbles. Dry in the lamp for another minute.

We fix the design in the same way with this top, but this time we put a thicker layer in order to align all the small bumps, as well as seal the film well under the material. If the lamp does not cope well with a thick layer of top, you can put two thin. Dry and remove the sticky layer.

Here is a new year, festive design we have.

1-1272-3.jpg?1542517713904