Geometric design with three-dimensional leaves

Today we will consider another variant of the autumn manicure with three-dimensional leaves. In the work we will use the 3d slider for nails BPW 3d141

For this design we will need:

• Base and top for gel-polish;
• Colored gel-polish;
• Slider design;
• Scissors;
• Water;
• Tweezers;
• Silicone brush;
• The buff;
• Lamp for polymerization of gel-polish;
• Liquid for removing the sticky layer.

As a base, we took a white gel varnish Cristina (shade 1323)..

For the design we chose a slider from BPW with a 3D effect (номер 3d-141).

To fix the slider-design, we use the method of "on a wet base" that is already well known to us. This is not the easiest method, but the slider occupies the entire nail plate, besides it contains volumetric elements, so we recommend it exactly.

2. Cut out the necessary elements of the slider design;
3. We lower it into the water;
4. We dip through a paper napkin to remove excess water;
5. On white, we apply a thin layer of a thin base (we used the MollonPRO base);
6. Separate the film with the design from the substrate;
7. We put the design on an undried base, carefully smooth it with a silicone brush;
8. Dry the base with the slider in the lamp;
9. With the help of a baff we remove from the buttress of the slider;
10. A well-pressed brush with top (the top should be well suited for fixing the slider-design, be thick and viscous, for example MollonPRO) cover the design, carefully sealing the ends, but trying not to fill the volume design elements with top so as not to destroy the volume effect;
11. Dry in a lamp and remove the sticky layer.

Here we have such a colorful design with 3D leaves.

Follow us on Instagram and Facebook so as not to miss the latest news.