Manicure with deer horns

Today we look at a rather unusual design with volumetric horns.

To perform this manicure, we need:

• Base and top for gel polish;
• Color gel polish;
• Slider design;
• Tweezers;
• Scissors;
• Paper napkin;
• Liquid to remove the sticky layer;
• Silicone brush;

Наносим базу на ногтевую пластину.

Today we have chosen white and black shades as a substrate for the design, namely Cristina gel polishes (shades 1323 and 1348).

For design we take a 3D slider design from BPW (номер 3d178).

For bulk sliders, we always use the “wet base” method. The base can be used any, but it is better that the base was not thick, it is easier not to pour a lot of material, thereby increasing the amount of coverage.

First, cut out the slider fragments and drop them into the water for a few seconds. After that we get the slider out of the water and put it on a paper napkin so that the liquid is gone.

In parallel with this, we apply a thin layer on the color coating. Separated from the substrate design put on the base and very quickly align it on the nail plate. You can use a silicone brush, an orange stick or a silicone claw. Dry in the lamp.

Next, take the top and squeeze the brush well so that we don’t destroy the 3D effect on the design with an excess amount of material and cover the nail plate with trailing movements, as well as the design, fixing it well. We are waiting for a bit to top leveled on the surface and dry in the lamp. Remove the sticky layer.

Here is a design with horns we have

Follow us on Instagram and Facebook so as not to miss the latest news.