Nail design with owls 3d glass effect

Today we will introduce you to one of the most popular designs of the 3d glass effect line. This is a design with owls.

For the work we need:

• Base and top for gel polish;
• Color gel polish;
• Slider design;
• Scissors;
• Tweezers;
• Silicone brush;
• Water;
• Paper napkin;
• Liquid to remove the sticky layer;
• Lamp for the polymerization of gel polish

First you need to put a base for gel polish, as well as a color substrate. For this design, you can use a white or light substrate, we chose the white gel varnish Cristina (shade 1323).

For design, take the GlassEffect slider from BPW.Style (number 3d-186).

This slider design is another type of 3D design, but instead of the usual three-dimensional elements, there is an imitation of rhinestone here. Working with this slider should be the same as with any other 3D design.

Best of all for this purpose the “wet base” method is suitable. So the main role of fixing the design will fall on the base, which will be under it, and we will not have to fill the volumetric elements with top, destroying the volume.

Apply a thin layer of the base to the dried color coating and put the design previously separated from the substrate onto the undrawn material.

Silicone brush a little straighten it, smooth irregularities and press the corners of the design. We dry.

We take the top, carefully squeeze the brush and put it on top of the design, trying not to pour a lot of material and smooth the design. Since the stamp is applied a very thin layer, it is better to give time to level it on the surface, and only then to polymerize. Remove the sticky layer and enjoy the result.

Here such lovely owls with rhinestones instead of eyes can decorate our manicure.

Follow us on Instagram and Facebook so as not to miss the latest news.