Bright manicure "paint strokes"

Spring - it's time to upgrade and add bright colors to your look. And when you want a bright and unusual manicure, our sliders will come to the rescue, because their choice is unlimited.

For the work we need:

• Base and top for gel polish;
• Color gel polish;
• Slider design;
• Scissors;
• Tweezers;
• Water;
• Paper napkin;
• Silicone brush;
• Baf;
• Liquid to remove the sticky layer;
• Lamp for the polymerization of gel varnish.

To begin with, we apply the base and color coating. Basic colors can be any. We chose the dark blue Bluesky gel polish (hue 079) and the pale yellow hue obtained from the white and yellow Cristina gel polishes (shades 1323 and 1342).

For design we take a slider from BPW.Style (number 5-1512).

First, cut out the necessary design fragments across the width of the nail plate and place the design in room temperature water.

After a few seconds, get the design and put it on a paper napkin to remove water from it.

At the same time, we apply a thin layer of the base on the color coating (today we will use the design only on the middle and ring fingers).

Removing the design from the substrate, put it on the previously applied base and smooth it with a silicone brush. The extra length at the end at this stage must be bent perpendicular to the nail plate.

Put in the lamp for one minute.

Clean the buff gently remove the length from the end of the nail.

Next, take the top and put it on the design, sealing all corners of the film, as well as aligning the small irregularities of the design.

We place in the lamp for one more minute. Remove the sticky layer.

Here we have such a bright colorful manicure with stripes.

Follow us on Instagram and Facebook so as not to miss the latest news.