The idea of a manicure with sliders-stencils SWEETBLOOM

Not so long ago in the field of the nail industry, a new trend appeared - a manicure in the style of SWEETBLOOM. In our opinion, the easiest way to perform such a manicure is to use special sliders-stencils. Пример применения слайдеров-трафаретов мы сейчас покажем.

To perform this manicure we will need:

• Base and top for gel-varnish;
• Colored gel-varnishes;
• Thin brush;
• Thick base / top / gel;
• Slider-stencil (you can choose here);
• Scissors;
• Tweezers;
• Water;
• Buff or glass file;
• Silicone brush / orange stick / silicone claw;
• Lamp for polymerization of gel-varnish;
• Liquid for removing the sticky layer.

As usual, first we put the base, if necessary, align and strengthen the nail plate, just apply the basic color. We chose the white gel-polish Cristina (shade 1323).

In order to make the design in the SweetBloom technique, we used sliders-stencils from BPW to make the drawing smooth and symmetrical.

We work with stencils in the same way as with other slider-designs. We apply either to a wet base, or fixed by two layers of top, suitable for working with a slider design.

After the slider design is applied and fixed, we begin to create. It is important to remove the sticky layer so that the pattern does not spread. To fulfill this design, we chose the bright coral gel Vogue gel ("Tea Rose" shade) and the blue NeoNail gel coat (shade 3648). In this case, it is better to use dense shades.

We select the right shade with a fine brush, and we paint over the picture where we want to see this shade. We do so with all the elements of design, it all depends on your imagination.

After the drawing is painted and dried, take a thick gel, a very dense base or top that holds the volume well. We put it on the palette and add a little gel-varnish for the color. We collect on the brush the painted gel, and we put a volumetric drop on an element of the drawing of the corresponding color. If the material quickly spreads, dry for a few seconds and continue with the next part of the picture. Two adjacent elements are best applied in turn and then polymerized so that the material does not flock to one large drop.

At the end of the work, we dry the design well (remember that volumetric elements require more time for polymerization), remove from the lamp, remove the sticky layer and enjoy a very unusual design.

Follow us on Instagram and Facebook so as not to miss the latest news.