Manicure with volume feathers

We continue to acquaint you with our collection of 3D 3D sliders and today we will consider a variant of a manicure with a design of 3d63 Feathers

To perform this manicure we will need:First we put the base, level and strengthen the nail plate.

• Base for gel-polish;
• Liquid base for slider-design;
• Top;
• Colored gel-polish;
• Slider design;
• Scissors;
• Tweezers;
• Water;
• Napkin;
• Silicone brush;
• Liquid for removing the sticky layer;
• Lamp for polymerization of gel-polish.

First we put the base, level and strengthen the nail plate.

This slider is universal and will look good on any color of varnish. For our manicure we chose a gel-varnish of fuchsia color (Kodi 166).

Take slider 3d63

To fix this design, we used the "wet basis" method. For this we do the following:

2. We apply a thin base layer to the color coating;
3. Cut out the slider design;
4. We lower the selected design in water for a few seconds;
5. We will soak through a dry paper napkin;
6. Separate the design from the substrate;
7. We put a film with a design on an undried base;
8. With the help of a silicone brush, we smooth out the design by smoothing the edges of the film;
9. Dry in the lamp;
10. Next, take the top, squeeze the brush well and cover the nails, trying to preserve the relief of the design.
11. Dry in the lamp;
12. Remove the sticky layer.

Here is such a simple and at the same time very unusual design with feathers we got

Follow us on Instagram and Facebook so as not to miss the latest news.